ORCID

Información ORCID de BOTANA PEDEMONTE, FRANCISCO JAVIER

Biografía

Researcher at the Materials Science, Metallurgical Engineering and Inorganic Chemistry Department, Universidad de Cádiz

Empleo

Universidad de Cádiz: Cádiz, Andalucía, España

Obras

Insights into laser powder bed fused Scalmalloy®: investigating the correlation between micromechanical and macroscale properties

2023 | JOURNAL_ARTICLE

DOI: 10.1016/j.jmrt.2023.06.228

Mostrar Detalles

Localized and stress corrosion cracking of sensitized Al-Mg-Sc-Zr alloy manufactured by laser powder bed fusion

2023 | JOURNAL_ARTICLE

DOI: 10.1016/j.corsci.2023.111166

Mostrar Detalles

Study of dose dependence on density in planar 3D-printed applicators for HDR Ir192 surface brachytherapy

2023 | JOURNAL_ARTICLE

DOI: 10.1016/j.brachy.2022.10.011

Mostrar Detalles

Achieving superhydrophobic surfaces with tunable roughness on building materials via nanosecond laser texturing of silane/siloxane coatings

2022 | JOURNAL_ARTICLE

DOI: 10.1016/j.jobe.2022.104979

Mostrar Detalles

Pitting and intergranular corrosion of Scalmalloy® aluminium alloy additively manufactured by Selective Laser Melting (SLM)

2022 | JOURNAL_ARTICLE

DOI: 10.1016/j.corsci.2022.110273

Mostrar Detalles

Application of Commercial Surface Pretreatments on the Formation of Cerium Conversion Coating (CeCC) over High-Strength Aluminum Alloys 2024-T3 and 7075-T6

2021 | JOURNAL_ARTICLE

DOI: 10.3390/met11060930

Mostrar Detalles

Characterisation of High Temperature Oxidation Phenomena during AISI 430 Stainless Steel Manufacturing under a Controlled H2 Atmosphere for Bright Annealing

2021 | JOURNAL_ARTICLE

DOI: 10.3390/met11020191

Mostrar Detalles

Changes in the microstructure and passive layer of 2024-T3 Al-Cu alloy during a chemical cleaning employed in the aerospace industry.,Modificaciones de la microestructura y la capa pasiva de la aleación 2024-T3 Al-Cu durante una limpieza química empleada en la industria aeroespacial

2019 | JOURNAL_ARTICLE

DOI: 10.3989/revmetalm.144

EID: 2-s2.0-85073644322

Parte de ISBN: 19884222 00348570

Mostrar Detalles

Influence of aerospace standard surface pretreatment on the intermetallic phases and cecc of 2024-t3 al-cu alloy

2019 | JOURNAL_ARTICLE

DOI: 10.3390/met9030320

EID: 2-s2.0-85064196970

Parte de ISBN: 20754701

Mostrar Detalles

The Role of Gold-Alumina Template in the Electrochemical Deposition of CeO2 Nanotubes

2019 | JOURNAL_ARTICLE

DOI: 10.1002/ppsc.201900168

EID: 2-s2.0-85070092518

Parte de ISBN: 15214117 09340866

Mostrar Detalles

Adhesive behaviour of carbon fibre reinforced plastic panels manufactured using woven and unidirectional tape after ultraviolet laser surface treatment

2018 | JOURNAL_ARTICLE

DOI: 10.1177/0021998317718614

EID: 2-s2.0-85043583634

Parte de ISBN: 1530793X 00219983

Mostrar Detalles

Effects of laser processing parameters on texturized layer development and surface features of Ti6Al4V alloy samples

2018 | JOURNAL_ARTICLE

DOI: 10.3390/coatings8010006

EID: 2-s2.0-85045532093

Parte de ISBN: 20796412

Mostrar Detalles

Springback estimation in the hydroforming process of UNS A92024-T3 aluminum alloy by FEM simulations

2018 | JOURNAL_ARTICLE

DOI: 10.3390/met8060404

EID: 2-s2.0-85048123561

Parte de ISBN: 20754701

Mostrar Detalles

A paperless based methodology for managing Quality Control. Application to a I+D+i Supplier Company

2017 | JOURNAL_ARTICLE

DOI: 10.1016/j.promfg.2017.09.135

EID: 2-s2.0-85030869654

Parte de ISBN: 23519789

Mostrar Detalles

Influence of pretreatments on intermetallic particles and Cerium conversion coating (CeCC) in aluminum aerospace alloys

2017 | CONFERENCE_PAPER

EID: 2-s2.0-85052318637

Mostrar Detalles

Microstructure and mechanical properties of Ti5553 butt welds performed by LBW under conduction regime

2017 | JOURNAL_ARTICLE

DOI: 10.3390/met7070269

EID: 2-s2.0-85025173158

Parte de ISBN: 20754701

Mostrar Detalles

Sliding wear behavior of UNS R56400 titanium alloy samples thermally oxidized by laser

2017 | JOURNAL_ARTICLE

DOI: 10.3390/ma10070830

EID: 2-s2.0-85025073019

Parte de ISBN: 19961944

Mostrar Detalles

Thermal laser oxidation based texturing as finishing treatment for improving surface properties of UNS R56400

2017 | JOURNAL_ARTICLE

DOI: 10.1016/j.promfg.2017.09.022

EID: 2-s2.0-85025064402

Parte de ISBN: 23519789

Mostrar Detalles

Topological optimization and manufacturing by Direct Metal Laser Sintering of an aeronautical part in 15-5PH stainless steel

2017 | JOURNAL_ARTICLE

DOI: 10.1016/j.promfg.2017.09.121

EID: 2-s2.0-85030855950

Parte de ISBN: 23519789

Mostrar Detalles

FEM Simulation and Experimental Validation of LBW Under Conduction Regime of Ti6Al4V Alloy

2016 | JOURNAL_ARTICLE

DOI: 10.1007/s11665-016-2214-1

EID: 2-s2.0-84978160185

Parte de ISBN: 15441024 10599495

Mostrar Detalles

Influence of surface pre-treatments on laser welding of Ti6Al4V alloy

2014 | JOURNAL_ARTICLE

DOI: 10.1007/s11665-014-0967-y

EID: 2-s2.0-84901029889

Parte de ISBN: 15441024 10599495

Mostrar Detalles

Tribological wear analysis of laser surface treated Ti6Al4V based on volume lost evaluation

2014 | BOOK

DOI: 10.4028/www.scientific.net/KEM.615.82

EID: 2-s2.0-84904118710

Parte de ISBN: 16629795 10139826

Mostrar Detalles

Comparison of Ti-5Al-5V-5Mo-3Cr welds performed by laser beam, electron beam and gas tungsten arc welding

2013 | CONFERENCE_PAPER

DOI: 10.1016/j.proeng.2013.08.202

EID: 2-s2.0-84888389775

Parte de ISBN: 18777058

Mostrar Detalles

Influence of CO2-Ar mixtures as shielding gas on laser welding of Al-Mg alloys

2013 | JOURNAL_ARTICLE

DOI: 10.1007/s11661-013-1953-y

EID: 2-s2.0-84892370422

Parte de ISBN: 10735623

Mostrar Detalles

Laser welding of light metal alloys: Aluminium and titanium alloys

2013 | BOOK_CHAPTER

DOI: 10.1533/9780857098771.2.215

EID: 2-s2.0-84939788807

Mostrar Detalles

Metrological evaluation of the tribological behavior of laser surface treated Ti6Al4V alloy

2013 | CONFERENCE_PAPER

DOI: 10.1016/j.proeng.2013.08.265

EID: 2-s2.0-84891697271

Parte de ISBN: 18777058

Mostrar Detalles

Analysis of the laser weldability under conduction regime of 2024, 5083, 6082 and 7075 aluminium alloys

2012 | BOOK

DOI: 10.4028/www.scientific.net/MSF.713.7

EID: 2-s2.0-84859050169

Parte de ISBN: 16629752 02555476

Mostrar Detalles

Application of laser remelting treatments to improve the properties of Ti6Al4V alloy

2012 | BOOK

DOI: 10.4028/www.scientific.net/MSF.713.25

EID: 2-s2.0-84859063260

Parte de ISBN: 16629752 02555476

Mostrar Detalles

Application of laser texturization to increase the depth of AA5083 welds

2012 | BOOK

DOI: 10.4028/www.scientific.net/AMR.498.37

EID: 2-s2.0-84860255870

Parte de ISBN: 10226680

Mostrar Detalles

Experimental correlation between metallographic evaluation and electrochemical noise in intergranular corrosion tests of aluminium alloys

2012 | JOURNAL_ARTICLE

DOI: 10.1002/sia.5003

EID: 2-s2.0-84865244169

Parte de ISBN: 01422421 10969918

Mostrar Detalles

Improvements of laser weldability of aluminum alloys by laser texturization

2012 | CONFERENCE_PAPER

DOI: 10.1063/1.4707657

EID: 2-s2.0-84863310348

Parte de ISBN: 0094243X 15517616

Mostrar Detalles

Laser remelting of Ti6AL4V using high power diode laser

2012 | CONFERENCE_PAPER

DOI: 10.1063/1.4707610

EID: 2-s2.0-84863318731

Parte de ISBN: 0094243X 15517616

Mostrar Detalles

Laser texturization to improve absorption and weld penetration of aluminum alloys

2012 | JOURNAL_ARTICLE

DOI: 10.2351/1.3659991

EID: 2-s2.0-84855303365

Parte de ISBN: 1042346X

Mostrar Detalles

Laser welding of aeronautical and automobile aluminum alloys

2012 | CONFERENCE_PAPER

DOI: 10.1063/1.4707658

EID: 2-s2.0-84863318328

Parte de ISBN: 0094243X 15517616

Mostrar Detalles

Microstructure, microhardness and corrosion resistance of remelted TiG2 and Ti6Al4V by a high power diode laser

2012 | JOURNAL_ARTICLE

DOI: 10.1016/j.corsci.2011.11.006

EID: 2-s2.0-84855863017

Parte de ISBN: 0010938X

Mostrar Detalles

Protection by thermal and chemical activation with cerium salts of the alloy AA2017 in aqueous solutions of NaCl

2012 | JOURNAL_ARTICLE

DOI: 10.1007/s11661-011-0858-x

EID: 2-s2.0-84855820069

Parte de ISBN: 10735623

Mostrar Detalles

Synthesis of ceria-praseodimia nanotubes with high catalytic activity for CO oxidation

2012 | JOURNAL_ARTICLE

DOI: 10.1016/j.cattod.2011.05.006

EID: 2-s2.0-84655161886

Parte de ISBN: 09205861

Mostrar Detalles

Weldability of aluminum alloys with high-power diode laser

2012 | JOURNAL_ARTICLE

EID: 2-s2.0-84861494179

Parte de ISBN: 00432296

Mostrar Detalles

XPS and AES analyses of cerium conversion coatings generated on AA5083 by thermal activation

2012 | JOURNAL_ARTICLE

DOI: 10.1016/j.surfcoat.2012.10.027

EID: 2-s2.0-84870255408

Parte de ISBN: 02578972

Mostrar Detalles

Direct sub-nanometer scale electron microscopy analysis of anion incorporation to self-ordered anodic alumina layers

2010 | JOURNAL_ARTICLE

DOI: 10.1016/j.corsci.2010.07.027

EID: 2-s2.0-77956266048

Parte de ISBN: 0010938X

Mostrar Detalles

Experimental and simulation studies on laser conduction welding of AA5083 aluminium alloys

2010 | CONFERENCE_PAPER

DOI: 10.1016/j.phpro.2010.08.056

EID: 2-s2.0-79551661956

Parte de ISBN: 18753892 18753884

Mostrar Detalles

Preliminary study of the influence of machining conditions in the response to corrosion of UNS-A92024 alloy

2010 | BOOK

DOI: 10.4028/www.scientific.net/AMR.107.117

EID: 2-s2.0-77954196351

Parte de ISBN: 10226680

Mostrar Detalles

Reply to comment on 'Formation and characterization of nanotubes of La(OH)3 obtained using porous alumina membranes'

2010 | JOURNAL_ARTICLE

DOI: 10.1088/0957-4484/21/8/088002

EID: 2-s2.0-76249083061

Parte de ISBN: 09574484 13616528

Mostrar Detalles

Behaviour of the alloy AA2017 in aqueous solutions of NaCl. Part I: Corrosion mechanisms

2009 | JOURNAL_ARTICLE

DOI: 10.1016/j.corsci.2008.12.027

EID: 2-s2.0-60549087484

Parte de ISBN: 0010938X

Mostrar Detalles

Erratum: Single-step process to prepare CeO2 nanotubes with improved catalytic activity (Electrochemical and Solid-State Letters (2009) 9 (2511))

2009 | JOURNAL_ARTICLE

DOI: 10.1021/nl901292s

EID: 2-s2.0-66749100094

Parte de ISBN: 15306984

Mostrar Detalles

Laser welding of AA 5083 samples by high power diode laser

2009 | JOURNAL_ARTICLE

DOI: 10.1179/136217108X347629

EID: 2-s2.0-58549120241

Parte de ISBN: 13621718 13621718

Mostrar Detalles

Laser welding of aluminium alloys 5083 and 6082 under conduction regime

2009 | JOURNAL_ARTICLE

DOI: 10.1016/j.apsusc.2009.07.081

EID: 2-s2.0-69249218933

Parte de ISBN: 01694332

Mostrar Detalles

Measurement of electrochemical noise for the study of corrosion processes of metallic alloys,Medida de ruido electroquímico para el estudio de procesos de corrosión de aleaciones metálicas

2009 | JOURNAL_ARTICLE

DOI: 10.3989/revmetalm.0807

EID: 2-s2.0-67650321346

Parte de ISBN: 00348570 19884222

Mostrar Detalles

Single-step process to prepare ceO2 nanotubes with improved catalytic activity

2009 | JOURNAL_ARTICLE

DOI: 10.1021/nl803047b

EID: 2-s2.0-65249110912

Parte de ISBN: 15306984

Mostrar Detalles

Effect of the environment on the metal release and corrosion behaviour of different copper-based alloys: Field exposures at 5 different test sites in Europe

2008 | CONFERENCE_PAPER

EID: 2-s2.0-84865030911

Mostrar Detalles

Formation and characterization of nanotubes of La(OH)3 obtained using porous alumina membranes

2008 | JOURNAL_ARTICLE

DOI: 10.1088/0957-4484/19/49/495305

EID: 2-s2.0-58149218274

Parte de ISBN: 09574484 13616528

Mostrar Detalles

Using EIS to analyse samples of Al-Mg alloy AA5083 treated by thermal activation in cerium salt baths

2008 | JOURNAL_ARTICLE

DOI: 10.1016/j.corsci.2007.12.009

EID: 2-s2.0-42049096360

Parte de ISBN: 0010938X

Mostrar Detalles

Monitoring the degradation of a high solids epoxy coating by means of EIS and EN

2007 | JOURNAL_ARTICLE

DOI: 10.1016/j.porgcoat.2007.07.020

EID: 2-s2.0-35348859467

Parte de ISBN: 03009440

Mostrar Detalles

Noise resistance and shot noise parameters on the study of IGC of aluminium alloys with different heat treatments

2007 | JOURNAL_ARTICLE

DOI: 10.1016/j.electacta.2007.04.094

EID: 2-s2.0-34249949157

Parte de ISBN: 00134686

Mostrar Detalles

Biocorrosion of carbon steel alloys by an hydrogenotrophic sulfate-reducing bacterium Desulfovibrio capillatus isolated from a Mexican oil field separator

2006 | JOURNAL_ARTICLE

DOI: 10.1016/j.corsci.2005.09.005

EID: 2-s2.0-33747201916

Parte de ISBN: 0010938X

Mostrar Detalles

EIS study of lanthanide conversion coatings developed by thermal activation on Al-Mg alloys,Estudio mediante EIS de capas lantánidas de conversión desarrolladas mediante activación térmica sobre aleaciones de Al-Mg

2005 | JOURNAL_ARTICLE

EID: 2-s2.0-33644669244

Parte de ISBN: 00348570

Mostrar Detalles

Hurst exponent on the study of electrochemical noise measurements

2005 | JOURNAL_ARTICLE

DOI: 10.5006/1.3280621

EID: 2-s2.0-30644472974

Parte de ISBN: 00109312

Mostrar Detalles

Lifetime prediction of water-borne paints with the AC-DC-AC accelerated electrochemical method,Empleo del método electroquímico acelerado AC-DC-AC para la predicción del tiempo de vida útil de pinturas base agua

2005 | JOURNAL_ARTICLE

EID: 2-s2.0-33644642589

Parte de ISBN: 00348570

Mostrar Detalles

New design pitting corrosion resistance stainless steel,Aceros inoxidables de nuevo diseño resistentes a la corrosión localizada

2005 | JOURNAL_ARTICLE

DOI: 10.3989/revmetalm.2005.v41.i2.199

EID: 2-s2.0-22544464154

Parte de ISBN: 00348570

Mostrar Detalles

Shot noise and statistical parameters for the estimation of corrosion mechanisms

2005 | JOURNAL_ARTICLE

DOI: 10.1016/j.corsci.2005.05.047

EID: 2-s2.0-27644472727

Parte de ISBN: 0010938X

Mostrar Detalles

Advanced generation of green conversion coatings for aluminium alloys

2004 | JOURNAL_ARTICLE

DOI: 10.1016/j.apsusc.2004.05.268

EID: 2-s2.0-4644357531

Parte de ISBN: 01694332

Mostrar Detalles

Determination of the weaker phase in the pitting corrosion of non-standard low-Ni high-Mn-N duplex stainless steels

2004 | JOURNAL_ARTICLE

DOI: 10.1002/maco.200303694

EID: 2-s2.0-1542287256

Parte de ISBN: 09475117

Mostrar Detalles

Evaluation of the surface treatment on carbon steel coated with an epoxy waterborne paint

2004 | CONFERENCE_PAPER

EID: 2-s2.0-84867239137

Mostrar Detalles

Influence of the degree of polishing of alloy AA 5083 on its behaviour against localised alkaline corrosion

2004 | JOURNAL_ARTICLE

DOI: 10.1016/j.corsci.2003.10.028

EID: 2-s2.0-2942696067

Parte de ISBN: 0010938X

Mostrar Detalles

Lifetime prediction of waterborne acrylic paints with the AC-DC-AC method

2004 | JOURNAL_ARTICLE

DOI: 10.1016/j.porgcoat.2003.10.009

EID: 2-s2.0-0347899467

Parte de ISBN: 03009440

Mostrar Detalles

Median Absolute Deviation (MAD) applied to the analysis of electrochemical noise,Aplicación de la Desviación Absoluta de la Mediana (DAM) al análisis de ruido electroquímico

2004 | JOURNAL_ARTICLE

EID: 2-s2.0-55449104441

Parte de ISBN: 03663175

Mostrar Detalles

Study of the methods of calculating hurst exponent to be applied to corrosion field

2004 | CONFERENCE_PAPER

EID: 2-s2.0-84867268961

Mostrar Detalles

Waterborne paints anticorrosive behaviour on steels,Comportamiento anticorrosivo de pinturas de base agua aplicadas en aceros

2004 | JOURNAL_ARTICLE

EID: 2-s2.0-55449125870

Parte de ISBN: 03663175

Mostrar Detalles

Combination of thermal activation and addition of H2O 2 to improve cerium-based immersion treatment of alloy AA5083

2003 | JOURNAL_ARTICLE

DOI: 10.1002/maco.200390024

EID: 2-s2.0-10644287843

Parte de ISBN: 09475117

Mostrar Detalles

Corrosion-erosion processes of the AA 5083 (Al-Mg) alloy in seawater,Procesos de corrosíon-erosíon de la aleacíon AA 5083 (Al-Mg) en agua de mar

2003 | JOURNAL_ARTICLE

DOI: 10.7773/cm.v29i4.175

EID: 2-s2.0-0242569318

Parte de ISBN: 01853880

Mostrar Detalles

Degradation mechanism of an acrylic water-based paint applied to steels

2003 | JOURNAL_ARTICLE

DOI: 10.1016/S0300-9440(03)00124-3

EID: 2-s2.0-0042431720

Parte de ISBN: 03009440

Mostrar Detalles

Influence of chemical composition on the pitting corrosion resistance of non-standard low-Ni high-Mn-N duplex stainless steels

2003 | JOURNAL_ARTICLE

DOI: 10.1016/S0010-938X(02)00154-3

EID: 2-s2.0-0037400419

Parte de ISBN: 0010938X

Mostrar Detalles

Influence of the cathodic intermetallics distribution on the reproducibility of the electrochemical measurements on AA5083 alloy in NaCl solutions

2003 | JOURNAL_ARTICLE

DOI: 10.1016/S0010-938X(02)00067-7

EID: 2-s2.0-0036403311

Parte de ISBN: 0010938X

Mostrar Detalles

Inhibitor properties of "green" pigments for paints

2003 | JOURNAL_ARTICLE

DOI: 10.1016/S0300-9440(03)00013-4

EID: 2-s2.0-0038249008

Parte de ISBN: 03009440

Mostrar Detalles

Electrochemical noise applied to the study of the inhibition effect of CeCl3 on the corrosion behaviour of Al-Mg alloy AA5083 in seawater

2002 | JOURNAL_ARTICLE

DOI: 10.1016/S0013-4686(01)00871-4

EID: 2-s2.0-0037084457

Parte de ISBN: 00134686

Mostrar Detalles

High protective, environmental friendly and short-time developed conversion coatings for aluminium alloys

2002 | JOURNAL_ARTICLE

DOI: 10.1016/S0169-4332(02)00129-0

EID: 2-s2.0-0037076193

Parte de ISBN: 01694332

Mostrar Detalles

Influence of the Al (Mn, Fe, Cr) precipitates distribution of the electrochemical response of AA5083 alloy in NaCl solution,Influencia de la distribución de precipitados de Al (Mn, Fe, Cr) en la reproducibilidad de la respuesta electroquímica de la aleación AA5083 en disolución de NaCl

2002 | JOURNAL_ARTICLE

DOI: 10.3989/revmetalm.2002.v38.i2.389

EID: 2-s2.0-0036507264

Parte de ISBN: 00348570

Mostrar Detalles

On the mixed nature of cerium conversion coatings

2002 | JOURNAL_ARTICLE

DOI: 10.1002/1521-4176(200203)53:3<176::AID-MACO176>3.0.CO;2-K

EID: 2-s2.0-10644235360

Parte de ISBN: 09475117 15214176

Mostrar Detalles

Alternatives to chrome in the aluminium surface finishing industry. Low environmental impact surface treatments,Alternativas al cromo en la industria del acabado superficial del aluminio. Tratamientos superficiales de bajo impacto ambiental

2001 | JOURNAL_ARTICLE

DOI: 10.3989/revmetalm.2001.v37.i1.440

EID: 2-s2.0-0035000917

Parte de ISBN: 00348570

Mostrar Detalles

CeCl3 and LaCl3 binary solutions as environment-friendly corrosion inhibitors of AA5083 Al-Mg alloy in NaCl solutions

2001 | JOURNAL_ARTICLE

DOI: 10.1016/S0925-8388(01)01160-4

EID: 2-s2.0-0035849737

Parte de ISBN: 09258388

Mostrar Detalles

Inhibition of 5083 aluminium alloy and galvanised steel by lanthanide salts

2001 | JOURNAL_ARTICLE

DOI: 10.1016/S0010-938X(00)00051-2

EID: 2-s2.0-0035141854

Parte de ISBN: 0010938X

Mostrar Detalles

Inhibition of the corrosion process of alloy AA5083 (Al-Mg) in seawater by cerium cations. An EIS study

2001 | JOURNAL_ARTICLE

DOI: 10.1002/1521-4176(200105)52:5<344::aid-maco344>3.0.co;2-s

EID: 2-s2.0-33746345650

Parte de ISBN: 00432822

Mostrar Detalles

Localized alkaline corrosion of alloy AA5083 in neutral 3.5% NaCl solution

2001 | JOURNAL_ARTICLE

DOI: 10.1016/S0010-938X(00)00166-9

EID: 2-s2.0-0035452157

Parte de ISBN: 0010938X

Mostrar Detalles

Use of wavelets to study electrochemical noise transients

2001 | JOURNAL_ARTICLE

DOI: 10.1016/S0013-4686(01)00424-8

EID: 2-s2.0-0035972075

Parte de ISBN: 00134686

Mostrar Detalles

Using EIS to study the electrochemical response of alloy AA5083 in solutions of NaCI

2001 | JOURNAL_ARTICLE

EID: 2-s2.0-33746259678

Parte de ISBN: 00432822

Mostrar Detalles

EIS study of the electrochemical response of AA5083 alloy under anodic polarisation

2000 | JOURNAL_ARTICLE

EID: 2-s2.0-0033717473

Parte de ISBN: 03346005

Mostrar Detalles

Monitoring of different corrosion types through the application of wavelet transform to current noise records,Seguimiento de diferentes tipos de corrosion mediante la aplicacion de la transformada de wavelets a registros de ruido en corriente

1999 | JOURNAL_ARTICLE

DOI: 10.3989/revmetalm.1999.v35.i6.647

EID: 2-s2.0-0033341961

Parte de ISBN: 00348570

Mostrar Detalles

Using wavelets transform in the analysis of electrochemical noise data

1999 | JOURNAL_ARTICLE

DOI: 10.1016/S0013-4686(99)00222-4

EID: 2-s2.0-0033336979

Parte de ISBN: 00134686

Mostrar Detalles

Wavelet transform-based analysis for electrochemical noise

1999 | JOURNAL_ARTICLE

DOI: 10.1016/S1388-2481(99)00053-3

EID: 2-s2.0-0000695170

Parte de ISBN: 13882481

Mostrar Detalles

Application of Fourier analysis to the study of roughness profiles of eroded samples,Aplicación del análisis de Fourier al estudio de perfiles de rugosidad de muestras erosionadas

1998 | JOURNAL_ARTICLE

EID: 2-s2.0-84923619279

Parte de ISBN: 19884222 00348570

Mostrar Detalles

Corrosion monitoring of the AA2024 alloy in NaCl solutions by electrochemical noise meassurements,Seguimiento de la corrosión de la aleación AA2024 en disoluciones de NaCl mediante la medida del ruido electroquímico

1998 | JOURNAL_ARTICLE

DOI: 10.3989/revmetalm.1998.v34.iextra.705

EID: 2-s2.0-0343124277

Parte de ISBN: 19884222 00348570

Mostrar Detalles

EIS study of the electrochemical response vs anodic DC signals of AA5083 alloy,Estudio mediante EIS de la respuesta electroquímica de la aleación AA5083 frente a señales DC anódicas

1998 | JOURNAL_ARTICLE

DOI: 10.3989/revmetalm.1998.v34.iextra.704

EID: 2-s2.0-0345810824

Parte de ISBN: 19884222 00348570

Mostrar Detalles

Electrochemical impedance spectroscopy study of the behaviour of lanthanide-rich films formed on aluminium-magnesium alloys

1998 | BOOK

EID: 2-s2.0-0032316086

Parte de ISBN: 16629752 02555476

Mostrar Detalles

Lanthanide compounds as environmentally-friendly corrosion inhibitors of aluminium alloys: A review

1998 | JOURNAL_ARTICLE

DOI: 10.1016/S0010-938X(98)00077-8

EID: 2-s2.0-0032216408

Parte de ISBN: 0010938X

Mostrar Detalles

Protection against salt water of the AA5083 alloy by treatments based on lanthanides salts,Protección contra la corrosión en agua de mar de la aleación AA5083 mediante tratamientos basados en sales lantánidas

1998 | JOURNAL_ARTICLE

DOI: 10.3989/revmetalm.1998.v34.iextra.706

EID: 2-s2.0-0002507288

Parte de ISBN: 19884222 00348570

Mostrar Detalles

The influence of the surface distribution of Al6(MnFe) intermetallic on the electrochemical response of AA5083 aluminium alloy in NaCl solutions

1998 | BOOK

EID: 2-s2.0-0032316087

Parte de ISBN: 16629752 02555476

Mostrar Detalles

The interpretation of HREM images of supported metal catalysts using image simulation: Profile view images

1998 | JOURNAL_ARTICLE

DOI: 10.1016/S0304-3991(98)00009-6

EID: 2-s2.0-0032078209

Parte de ISBN: 03043991

Mostrar Detalles

Green inhibitors. Rare earth based systems,Inhibidores de escaso impacto medioambiental. Sistemas basados en tierras raras

1997 | JOURNAL_ARTICLE

EID: 2-s2.0-0031280569

Parte de ISBN: 00348570

Mostrar Detalles

Protection against corrosion in marine environments of AA5083 Al-Mg alloy by lanthanide chlorides

1997 | JOURNAL_ARTICLE

DOI: 10.1016/S0925-8388(96)02826-5

EID: 2-s2.0-0347877189

Parte de ISBN: 09258388

Mostrar Detalles

High-resolution electron microscopy investigation of metal-support interactions in Rh/TiO2

1996 | JOURNAL_ARTICLE

DOI: 10.1039/FT9969202799

EID: 2-s2.0-33748610544

Parte de ISBN: 09565000

Mostrar Detalles

HREM study of the behaviour of a Rh/CeO2 catalyst under high temperature reducing and oxidizing conditions

1995 | JOURNAL_ARTICLE

DOI: 10.1016/0920-5861(94)00165-X

EID: 2-s2.0-0001677236

Parte de ISBN: 09205861

Mostrar Detalles

Lanthanide salts as alternative corrosion inhibitors

1995 | JOURNAL_ARTICLE

DOI: 10.1016/0925-8388(94)07135-7

EID: 2-s2.0-0001205292

Parte de ISBN: 09258388

Mostrar Detalles

Study of the reduction/reoxidation cycle in a La/Ce/Tb mixed oxide

1994 | JOURNAL_ARTICLE

DOI: 10.1016/0925-8388(94)90205-4

EID: 2-s2.0-0028448273

Parte de ISBN: 09258388

Mostrar Detalles

Microstructural and chemical properties of ceria-supported rhodium catalysts reduced at 773 K

1993 | JOURNAL_ARTICLE

DOI: 10.1021/j100118a031

EID: 2-s2.0-33751385119

Parte de ISBN: 00223654

Mostrar Detalles

Catalytic behaviour and surface properties of supported lanthana

1992 | JOURNAL_ARTICLE

DOI: 10.1016/0925-8388(92)90395-P

EID: 2-s2.0-0026835518

Parte de ISBN: 09258388

Mostrar Detalles

Preparation and characterization of a praseodymium oxide to be used as a catalytic support

1992 | JOURNAL_ARTICLE

DOI: 10.1016/0925-8388(92)90392-M

EID: 2-s2.0-0026835604

Parte de ISBN: 09258388

Mostrar Detalles

HREM characterization of metal catalysts supported on rare-earth oxides: samarium oxide as support

1990 | JOURNAL_ARTICLE

DOI: 10.1016/0304-3991(90)90058-T

EID: 2-s2.0-0025514375

Parte de ISBN: 03043991

Mostrar Detalles

Metal-Support Interaction Phenomena in Some High Metal Loading Lanthana Supported Rhodium Catalysts

1989 | BOOK

DOI: 10.1016/S0167-2991(08)60676-X

EID: 2-s2.0-0347045347

Parte de ISBN: 01672991

Mostrar Detalles

Characterisation of rare earth oxide supported metal catalysts. Study of some ceria supported rhodium phases

1988 | JOURNAL_ARTICLE

DOI: 10.1016/0920-5861(88)85029-6

EID: 2-s2.0-0023326347

Parte de ISBN: 09205861

Mostrar Detalles

Study of the interaction of two hexagonal neodymium oxides with atmospheric CO2 and H2O

1988 | JOURNAL_ARTICLE

DOI: 10.1007/BF01154619

EID: 2-s2.0-0023997225

Parte de ISBN: 00222461 15734803

Mostrar Detalles

The chemistry in air of the rare-earth-metal sesquioxides. Comparative study of hexagonal and cubic neodymia samples

1988 | JOURNAL_ARTICLE

DOI: 10.1039/DT9880001765

EID: 2-s2.0-37049082816

Parte de ISBN: 14727773

Mostrar Detalles

Behaviour of neodymia as a support of highly dispersed rhodium

1987 | JOURNAL_ARTICLE

DOI: 10.1016/S0020-1693(00)81048-8

EID: 2-s2.0-45949113277

Parte de ISBN: 00201693

Mostrar Detalles

Behaviour of rare earth sesquioxides exposed to atmospheric carbon dioxide and water

1987 | JOURNAL_ARTICLE

DOI: 10.1016/0168-7336(87)80085-2

EID: 2-s2.0-0023435547

Parte de ISBN: 01687336

Mostrar Detalles

Preparation of catalysts constituted by rhodium supported on two cerium dioxides with different surface area

1987 | JOURNAL_ARTICLE

DOI: 10.1016/0254-0584(87)90116-7

EID: 2-s2.0-0023428684

Parte de ISBN: 02540584

Mostrar Detalles

Preparation of lanthana supported rhodium catalysts. Occurrence of heavy carbonation phenomena on the support.

1987 | JOURNAL_ARTICLE

DOI: 10.1016/S0166-9834(00)80696-X

EID: 2-s2.0-0023362654

Parte de ISBN: 01669834

Mostrar Detalles

Preparation of some rare earth oxide supported rhodium catalysts: Study of the supports

1987 | JOURNAL_ARTICLE

DOI: 10.1016/0254-0584(87)90093-9

EID: 2-s2.0-0023398948

Parte de ISBN: 02540584

Mostrar Detalles

Solid state chemistry of the preparation of lanthana-supported metal catalysts - study of the impregnation step

1987 | JOURNAL_ARTICLE

DOI: 10.1007/BF01161496

EID: 2-s2.0-0023438075

Parte de ISBN: 00222461 15734803

Mostrar Detalles

Study of the aging in air of a cubic sample of samaria

1987 | JOURNAL_ARTICLE

DOI: 10.1016/0025-5408(87)90160-7

EID: 2-s2.0-0023089383

Parte de ISBN: 00255408

Mostrar Detalles

Study of the support evolution through the process of preparation of rhodium/lanthana catalysts

1987 | JOURNAL_ARTICLE

DOI: 10.1039/F19878302279

EID: 2-s2.0-0342720038

Parte de ISBN: 03009599

Mostrar Detalles

The influence of the structural nature of samaria on its behaviour against atmospheric CO2 and H2O

1987 | JOURNAL_ARTICLE

DOI: 10.1016/0167-577X(87)90036-X

EID: 2-s2.0-0023534663

Parte de ISBN: 0167577X

Mostrar Detalles

Characterization of an experimental TPD-MS system. Reliability problems

1986 | JOURNAL_ARTICLE

DOI: 10.1016/0040-6031(86)87102-7

EID: 2-s2.0-45949127782

Parte de ISBN: 00406031

Mostrar Detalles

Comments on the preparation of M/4f oxide catalysts

1986 | JOURNAL_ARTICLE

DOI: 10.1016/S0166-9834(00)81369-X

EID: 2-s2.0-33748584387

Parte de ISBN: 01669834

Mostrar Detalles

Characterization of samaria samples stabilized in air

1985 | JOURNAL_ARTICLE

DOI: 10.1016/0022-5088(85)90354-6

EID: 2-s2.0-0022112322

Parte de ISBN: 00225088

Mostrar Detalles

Thermal evolution of a sample of La2O3 exposed to the atmosphere

1983 | JOURNAL_ARTICLE

DOI: 10.1016/0040-6031(93)85026-6

EID: 2-s2.0-43949165920

Parte de ISBN: 00406031

Mostrar Detalles

Política de Cookies

Personalización de Cookies

Información ORCID de BOTANA PEDEMONTE, FRANCISCO JAVIER

Biografía

Empleo

Obras

Insights into laser powder bed fused Scalmalloy®: investigating the correlation between micromechanical and macroscale properties

Localized and stress corrosion cracking of sensitized Al-Mg-Sc-Zr alloy manufactured by laser powder bed fusion

Study of dose dependence on density in planar 3D-printed applicators for HDR Ir192 surface brachytherapy

Achieving superhydrophobic surfaces with tunable roughness on building materials via nanosecond laser texturing of silane/siloxane coatings

Pitting and intergranular corrosion of Scalmalloy® aluminium alloy additively manufactured by Selective Laser Melting (SLM)

Application of Commercial Surface Pretreatments on the Formation of Cerium Conversion Coating (CeCC) over High-Strength Aluminum Alloys 2024-T3 and 7075-T6

Characterisation of High Temperature Oxidation Phenomena during AISI 430 Stainless Steel Manufacturing under a Controlled H2 Atmosphere for Bright Annealing

Changes in the microstructure and passive layer of 2024-T3 Al-Cu alloy during a chemical cleaning employed in the aerospace industry.,Modificaciones de la microestructura y la capa pasiva de la aleación 2024-T3 Al-Cu durante una limpieza química empleada en la industria aeroespacial

Influence of aerospace standard surface pretreatment on the intermetallic phases and cecc of 2024-t3 al-cu alloy

The Role of Gold-Alumina Template in the Electrochemical Deposition of CeO2 Nanotubes

Adhesive behaviour of carbon fibre reinforced plastic panels manufactured using woven and unidirectional tape after ultraviolet laser surface treatment

Effects of laser processing parameters on texturized layer development and surface features of Ti6Al4V alloy samples

Springback estimation in the hydroforming process of UNS A92024-T3 aluminum alloy by FEM simulations

A paperless based methodology for managing Quality Control. Application to a I+D+i Supplier Company

Influence of pretreatments on intermetallic particles and Cerium conversion coating (CeCC) in aluminum aerospace alloys

Microstructure and mechanical properties of Ti5553 butt welds performed by LBW under conduction regime

Sliding wear behavior of UNS R56400 titanium alloy samples thermally oxidized by laser

Thermal laser oxidation based texturing as finishing treatment for improving surface properties of UNS R56400

Topological optimization and manufacturing by Direct Metal Laser Sintering of an aeronautical part in 15-5PH stainless steel

FEM Simulation and Experimental Validation of LBW Under Conduction Regime of Ti6Al4V Alloy

Influence of surface pre-treatments on laser welding of Ti6Al4V alloy

Tribological wear analysis of laser surface treated Ti6Al4V based on volume lost evaluation

Comparison of Ti-5Al-5V-5Mo-3Cr welds performed by laser beam, electron beam and gas tungsten arc welding

Influence of CO2-Ar mixtures as shielding gas on laser welding of Al-Mg alloys

Laser welding of light metal alloys: Aluminium and titanium alloys

Metrological evaluation of the tribological behavior of laser surface treated Ti6Al4V alloy

Analysis of the laser weldability under conduction regime of 2024, 5083, 6082 and 7075 aluminium alloys

Application of laser remelting treatments to improve the properties of Ti6Al4V alloy

Application of laser texturization to increase the depth of AA5083 welds

Experimental correlation between metallographic evaluation and electrochemical noise in intergranular corrosion tests of aluminium alloys

Improvements of laser weldability of aluminum alloys by laser texturization

Laser remelting of Ti6AL4V using high power diode laser

Laser texturization to improve absorption and weld penetration of aluminum alloys

Laser welding of aeronautical and automobile aluminum alloys

Microstructure, microhardness and corrosion resistance of remelted TiG2 and Ti6Al4V by a high power diode laser

Protection by thermal and chemical activation with cerium salts of the alloy AA2017 in aqueous solutions of NaCl

Synthesis of ceria-praseodimia nanotubes with high catalytic activity for CO oxidation

Weldability of aluminum alloys with high-power diode laser

XPS and AES analyses of cerium conversion coatings generated on AA5083 by thermal activation

Direct sub-nanometer scale electron microscopy analysis of anion incorporation to self-ordered anodic alumina layers

Experimental and simulation studies on laser conduction welding of AA5083 aluminium alloys

Preliminary study of the influence of machining conditions in the response to corrosion of UNS-A92024 alloy

Reply to comment on 'Formation and characterization of nanotubes of La(OH)3 obtained using porous alumina membranes'

Behaviour of the alloy AA2017 in aqueous solutions of NaCl. Part I: Corrosion mechanisms

Erratum: Single-step process to prepare CeO2 nanotubes with improved catalytic activity (Electrochemical and Solid-State Letters (2009) 9 (2511))

Laser welding of AA 5083 samples by high power diode laser

Laser welding of aluminium alloys 5083 and 6082 under conduction regime

Measurement of electrochemical noise for the study of corrosion processes of metallic alloys,Medida de ruido electroquímico para el estudio de procesos de corrosión de aleaciones metálicas

Single-step process to prepare ceO2 nanotubes with improved catalytic activity

Effect of the environment on the metal release and corrosion behaviour of different copper-based alloys: Field exposures at 5 different test sites in Europe

Formation and characterization of nanotubes of La(OH)3 obtained using porous alumina membranes

Using EIS to analyse samples of Al-Mg alloy AA5083 treated by thermal activation in cerium salt baths

Monitoring the degradation of a high solids epoxy coating by means of EIS and EN

Noise resistance and shot noise parameters on the study of IGC of aluminium alloys with different heat treatments

Biocorrosion of carbon steel alloys by an hydrogenotrophic sulfate-reducing bacterium Desulfovibrio capillatus isolated from a Mexican oil field separator

EIS study of lanthanide conversion coatings developed by thermal activation on Al-Mg alloys,Estudio mediante EIS de capas lantánidas de conversión desarrolladas mediante activación térmica sobre aleaciones de Al-Mg

Hurst exponent on the study of electrochemical noise measurements

Lifetime prediction of water-borne paints with the AC-DC-AC accelerated electrochemical method,Empleo del método electroquímico acelerado AC-DC-AC para la predicción del tiempo de vida útil de pinturas base agua

New design pitting corrosion resistance stainless steel,Aceros inoxidables de nuevo diseño resistentes a la corrosión localizada

Shot noise and statistical parameters for the estimation of corrosion mechanisms

Advanced generation of green conversion coatings for aluminium alloys

Determination of the weaker phase in the pitting corrosion of non-standard low-Ni high-Mn-N duplex stainless steels

Evaluation of the surface treatment on carbon steel coated with an epoxy waterborne paint

Influence of the degree of polishing of alloy AA 5083 on its behaviour against localised alkaline corrosion

Lifetime prediction of waterborne acrylic paints with the AC-DC-AC method

Median Absolute Deviation (MAD) applied to the analysis of electrochemical noise,Aplicación de la Desviación Absoluta de la Mediana (DAM) al análisis de ruido electroquímico

Study of the methods of calculating hurst exponent to be applied to corrosion field

Waterborne paints anticorrosive behaviour on steels,Comportamiento anticorrosivo de pinturas de base agua aplicadas en aceros

Combination of thermal activation and addition of H2O 2 to improve cerium-based immersion treatment of alloy AA5083

Corrosion-erosion processes of the AA 5083 (Al-Mg) alloy in seawater,Procesos de corrosíon-erosíon de la aleacíon AA 5083 (Al-Mg) en agua de mar

Degradation mechanism of an acrylic water-based paint applied to steels

Influence of chemical composition on the pitting corrosion resistance of non-standard low-Ni high-Mn-N duplex stainless steels

Influence of the cathodic intermetallics distribution on the reproducibility of the electrochemical measurements on AA5083 alloy in NaCl solutions

Inhibitor properties of "green" pigments for paints